gcloud alpha compute routers add-bgp-peer - add a BGP peer to a Compute Engine router
gcloud alpha compute routers add-bgp-peer NAME --interface=INTERFACE --peer-asn=PEER_ASN --peer-name=PEER_NAME [--advertised-route-priority=ADVERTISED_ROUTE_PRIORITY] [--advertisement-mode=MODE] [--async] [--[no-]enable-ipv6] [--[no-]enabled] [--instance=INSTANCE] [--instance-zone=INSTANCE_ZONE] [--ipv6-nexthop-address=IPV6_NEXTHOP_ADDRESS] [--md5-authentication-key=MD5_AUTHENTICATION_KEY] [--peer-ip-address=PEER_IP_ADDRESS] [--peer-ipv6-nexthop-address=PEER_IPV6_NEXTHOP_ADDRESS] [--region=REGION] [--set-advertisement-groups=[GROUP,...]] [--set-advertisement-ranges=[CIDR_RANGE=DESC,...]] [--bfd-min-receive-interval=BFD_MIN_RECEIVE_INTERVAL --bfd-min-transmit-interval=BFD_MIN_TRANSMIT_INTERVAL --bfd-multiplier=BFD_MULTIPLIER --bfd-session-initialization-mode=BFD_SESSION_INITIALIZATION_MODE] [GCLOUD_WIDE_FLAG ...]
(ALPHA) Add a BGP peer to a Compute Engine router.
- NAME
Name of the router to operate on.
- --interface=INTERFACE
The name of the interface for this BGP peer.
- --peer-asn=PEER_ASN
The BGP autonomous system number (ASN) for this BGP peer. Must be a 16-bit or 32-bit private ASN as defined in https://tools.ietf.org/html/rfc6996, for example --asn=64512.
- --peer-name=PEER_NAME
The name of the new BGP peer being added.
- --advertised-route-priority=ADVERTISED_ROUTE_PRIORITY
The priority of routes advertised to this BGP peer. In the case where there is more than one matching route of maximum length, the routes with lowest priority value win. 0 <= priority <= 65535. If not specified, will use Google-managed priorities.
- --advertisement-mode=MODE
The new advertisement mode for this peer. MODE must be one of:
- CUSTOM
Custom (user-configured) BGP advertisements.
- DEFAULT
Default (Google-managed) BGP advertisements.
- --async
Return immediately, without waiting for the operation in progress to complete.
- --[no-]enable-ipv6
If IPv6 is enabled, the peer connection can be established with IPv6 route exchange. If disabled, no IPv6 route exchange is allowed on any active session. Disabled by default. Use --enable-ipv6 to enable and --no-enable-ipv6 to disable.
- --[no-]enabled
If enabled, the peer connection can be established with routing information. If disabled, any active session with the peer is terminated and all associated routing information is removed. Enabled by default. Use --enabled to enable and --no-enabled to disable.
- --instance=INSTANCE
Router appliance instance of the BGP peer being added.
- --instance-zone=INSTANCE_ZONE
Zone of the instance to operate on. If not specified, you might be prompted to select a zone (interactive mode only). gcloud attempts to identify the appropriate zone by searching for resources in your currently active project. If the zone cannot be determined, gcloud prompts you for a selection with all available Google Cloud Platform zones.
To avoid prompting when this flag is omitted, the user can set the compute/zone property:
$ gcloud config set compute/zone ZONE
A list of zones can be fetched by running:
$ gcloud compute zones list
To unset the property, run:
$ gcloud config unset compute/zone
Alternatively, the zone can be stored in the environment variable CLOUDSDK_COMPUTE_ZONE.
- --ipv6-nexthop-address=IPV6_NEXTHOP_ADDRESS
The IPv6 next hop address of the Cloud Router interface for this BGP peer. Must be a Google owned global unicast IPv6 address belonging to the range 2600:2d00:0:2:0:0:0:0/64 or 2600:2d00:0:3:0:0:0:0/64 and must belong to same subnet as the interface address of the peer router.
- --md5-authentication-key=MD5_AUTHENTICATION_KEY
The MD5 authentication key for this BGP peer. Maximum length is 80 characters. Can contain only printable ASCII characters.
- --peer-ip-address=PEER_IP_ADDRESS
The link-local address of the peer router. Must be a link-local IPv4 address belonging to the range 169.254.0.0/16.
- --peer-ipv6-nexthop-address=PEER_IPV6_NEXTHOP_ADDRESS
The IPv6 next hop address of the peer router. Must be a Google owned global unicast IPv6 address belonging to the range 2600:2d00:0:2:0:0:0:0/64 or 2600:2d00:0:3:0:0:0:0/64.
- --region=REGION
Region of the router to operate on. If not specified, you might be prompted to select a region (interactive mode only).
To avoid prompting when this flag is omitted, you can set the compute/region property:
$ gcloud config set compute/region REGION
A list of regions can be fetched by running:
$ gcloud compute regions list
To unset the property, run:
$ gcloud config unset compute/region
Alternatively, the region can be stored in the environment variable CLOUDSDK_COMPUTE_REGION.
- --set-advertisement-groups=[GROUP,...]
The list of pre-defined groups of IP ranges to dynamically advertise on this peer. This list can only be specified in custom advertisement mode.
GROUP must be (currently only one value is supported):
- ALL_SUBNETS
Automatically advertise all available subnets.
- --set-advertisement-ranges=[CIDR_RANGE=DESC,...]
The list of individual IP ranges, in CIDR format, to dynamically advertise on this peer. Each IP range can (optionally) be given a text description DESC. For example, to advertise a specific range, use --set-advertisement-ranges=192.168.10.0/24. To store a description with the range, use --set-advertisement-ranges=192.168.10.0/24=my-networks. This list can only be specified in custom advertisement mode.
- Arguments to configure BFD (Bidirectional Forwarding Detection) settings:
- --bfd-min-receive-interval=BFD_MIN_RECEIVE_INTERVAL
The minimum receive interval between BFD control packets. The default is 1000 milliseconds. See $ gcloud topic datetimes for information on duration formats.
- --bfd-min-transmit-interval=BFD_MIN_TRANSMIT_INTERVAL
The minimum transmit interval between BFD control packets. The default is 1000 milliseconds. See $ gcloud topic datetimes for information on duration formats.
- --bfd-multiplier=BFD_MULTIPLIER
The number of consecutive BFD control packets that must be missed before BFD declares that a peer is unavailable.
- --bfd-session-initialization-mode=BFD_SESSION_INITIALIZATION_MODE
The BFD session initialization mode for this BGP peer. Must be one of:
ACTIVE - The Cloud Router will initiate the BFD session for this BGP peer.
PASSIVE - The Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer.
DISABLED - BFD is disabled for this BGP peer.
BFD_SESSION_INITIALIZATION_MODE must be one of:
- ACTIVE
The Cloud Router will initiate the BFD session for this BGP peer.
- DISABLED
BFD is disabled for this BGP peer.
- PASSIVE
The Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer.
These flags are available to all commands: --access-token-file, --account, --billing-project, --configuration, --flags-file, --flatten, --format, --help, --impersonate-service-account, --log-http, --project, --quiet, --trace-token, --user-output-enabled, --verbosity.
Run $ gcloud help for details.
This command is currently in alpha and might change without notice. If this command fails with API permission errors despite specifying the correct project, you might be trying to access an API with an invitation-only early access allowlist. These variants are also available:
$ gcloud compute routers add-bgp-peer
$ gcloud beta compute routers add-bgp-peer