gcloud beta compute networks vpc-access connectors create - create a VPC Access connector
gcloud beta compute networks vpc-access connectors create (CONNECTOR : --region=REGION) [--async] [--machine-type=MACHINE_TYPE] [--max-instances=MAX_INSTANCES; default=10 --min-instances=MIN_INSTANCES; default=2 | --max-throughput=MAX_THROUGHPUT --min-throughput=MIN_THROUGHPUT] [--network=NETWORK; default="default" --range=RANGE | --subnet=SUBNET --subnet-project=SUBNET_PROJECT] [GCLOUD_WIDE_FLAG ...]
(BETA) Create a new VPC Access connector with the given name.
This command can fail for the following reasons:
An instance with the same name already exists.
The active account does not have permission to create instances.
The following command creates a VPC Access connector with name 'my-vpc-connector' in region 'us-central1' in network 'my-network' with IP CIDR range of '10.132.0.0/28'.
$ gcloud beta compute networks vpc-access connectors create \ my-vpc-connector --region=us-central1 --network=my-network \ --range=10.132.0.0/28
- Connector resource - Arguments and flags that specify the VPC Access connector
you want to create. The arguments in this group can be used to specify the attributes of this resource. (NOTE) Some attributes are not given arguments in this group but can be set in other ways. To set the project attribute:
- —
provide the argument connector on the command line with a fully specified name;
- —
provide the argument --project on the command line;
- —
set the property core/project.
This must be specified.
- CONNECTOR
ID of the connector or fully qualified identifier for the connector. To set the connector attribute:
provide the argument connector on the command line.
This positional argument must be specified if any of the other arguments in this group are specified.
- --region=REGION
Compute region (e.g. us-central1) for the connector.
To set the region attribute:
provide the argument connector on the command line with a fully specified name;
provide the argument --region on the command line.
- --async
Return immediately, without waiting for the operation in progress to complete.
- --machine-type=MACHINE_TYPE
Machine type of VMs underlying the VPC Access connector. Accepted values are e2-micro, f1-micro, and e2-standard-4. If left unspecified, the e2-micro machine type is used.
- At most one of these can be specified:
- Scaling settings of a VPC Access Connector can be specified in terms of number
of Google Compute Engine VM instances underlying the connector autoscaling group.
- --max-instances=MAX_INSTANCES; default=10
Maximum number of instances within an autoscaling group underlying the connector. Value must be between 2-10. Must be higher than the value specified by --min-instances.
- --min-instances=MIN_INSTANCES; default=2
Minimum number of instances within an autoscaling group underlying the connector. Value must be between 1-9. Must be lower than the value specified by --max-instances.
- Scaling settings of a VPC Access Connector can be specified in terms of
throughput.
- --max-throughput=MAX_THROUGHPUT
Maximum throughput in Mbps. Value must be a multiple of 100 from 300 through 1000. Must be higher than the value specified by --min-throughput; the set value, if applicable, or the default minimum throughput value.
- --min-throughput=MIN_THROUGHPUT
Minimum throughput in Mbps. Value must be a multiple of 100 from 200 through 900. Must be lower than the value specified by --max-throughput; the set value, if applicable, or the default maximum throughput value.
- At most one of these can be specified:
- The Serverless VPC Access API can internally manage the creation of a subnet to
house the VPC connector. To create this subnet, the network ID (--network) and an IP CIDR range (--range) for the subnet must be provided.
- --network=NETWORK; default="default"
Name of the Compute Engine network to which the connector will be connected. If left unspecified, the default network will be used.
- --range=RANGE
CIDR range of internal addresses that are reserved for this connector. For example, 10.132.0.0/28. Range must be unique and non-overlapping with existing ranges in the network.
- You can specify a subnet in which to place the connector rather than using an
internally managed subnet. If you wish to use this connector to attach your Serverless application to a Shared VPC, first share a subnet to the project to which you are deploying your connector. Then, supply the name of the subnet (--subnet) and the project ID (--subnet-project) from which the subnet is hosted to connect to this VPC.
- --subnet=SUBNET
User-provided subnet to house the connector. This field can be used in favor of specifying the network and range fields. e.g. "my-subnet"
- --subnet-project=SUBNET_PROJECT
Project ID of the provided subnet. The default is the project of the connector.
These flags are available to all commands: --access-token-file, --account, --billing-project, --configuration, --flags-file, --flatten, --format, --help, --impersonate-service-account, --log-http, --project, --quiet, --trace-token, --user-output-enabled, --verbosity.
Run $ gcloud help for details.
This command uses the vpcaccess/v1beta1 API. The full documentation for this API can be found at: https://cloud.google.com/vpc/docs/configure-serverless-vpc-access
This command is currently in beta and might change without notice. This variant is also available:
$ gcloud compute networks vpc-access connectors create