This tutorial shows off much of GNU parallel's functionality. The tutorial is meant to learn the options in and syntax of GNU parallel. The tutorial is not to show realistic examples from the real world.
If you prefer reading a book buy GNU Parallel 2018 at https://www.lulu.com/shop/ole-tange/gnu-parallel-2018/paperback/product-23558902.html or download it at: https://doi.org/10.5281/zenodo.1146014
Otherwise start by watching the intro videos for a quick introduction: https://www.youtube.com/playlist?list=PL284C9FF2488BC6D1
Then browse through the EXAMPLEs after the list of OPTIONS in man parallel (Use LESS=+/EXAMPLE: man parallel). That will give you an idea of what GNU parallel is capable of.
If you want to dive even deeper: spend a couple of hours walking through the tutorial (man parallel_tutorial). Your command line will love you for it.
Finally you may want to look at the rest of the manual (man parallel) if you have special needs not already covered.
If you want to know the design decisions behind GNU parallel, try: man parallel_design. This is also a good intro if you intend to change GNU parallel.
To run this tutorial you must have the following:
Install the newest version using your package manager (recommended for security reasons), the way described in README, or with this command: $ (wget -O - pi.dk/3 || lynx -source pi.dk/3 || curl pi.dk/3/ || \ fetch -o - http://pi.dk/3 ) > install.sh $ sha1sum install.sh 12345678 3374ec53 bacb199b 245af2dd a86df6c9 $ md5sum install.sh 029a9ac0 6e8b5bc6 052eac57 b2c3c9ca $ sha512sum install.sh 40f53af6 9e20dae5 713ba06c f517006d 9897747b ed8a4694 b1acba1b 1464beb4 60055629 3f2356f3 3e9c4e3c 76e3f3af a9db4b32 bd33322b 975696fc e6b23cfb $ bash install.sh This will also install the newest version of the tutorial which you can see by running this: man parallel_tutorial Most of the tutorial will work on older versions, too.
The file can be generated by this command: parallel -k echo ::: A B C > abc-file
The file can be generated by this command: parallel -k echo ::: D E F > def-file
The file can be generated by this command: perl -e printf "A\0B\0C\0" > abc0-file
The file can be generated by this command: perl -e printf "A_B_C_" > abc_-file
The file can be generated by this command: perl -e printf "f1\tf2\nA\tB\nC\tD\n" > tsv-file.tsv
The file can be generated by this command: perl -e for(1..8){print "$_\n"} > num8
The file can be generated by this command: perl -e for(1..128){print "$_\n"} > num128
The file can be generated by this command: perl -e for(1..30000){print "$_\n"} > num30000
The file can be generated by this command: perl -e for(1..1000000){print "$_\n"} > num1000000
The file can be generated by this command: (echo %head1; echo %head2; \ perl -e for(1..10){print "$_\n"}) > num_%header
The file can be generated by this command: perl -e print "HHHHAAABBBCCC" > fixedlen
SERVER1=server.example.com SERVER2=server2.example.net So you must be able to do this without entering a password: ssh $SERVER1 echo works ssh $SERVER2 echo works It can be setup by running 'ssh-keygen -t dsa; ssh-copy-id $SERVER1' and using an empty passphrase, or you can use ssh-agent.
GNU parallel reads input from input sources. These can be files, the command line, and stdin (standard input or a pipe).
Input can be read from the command line:
parallel echo ::: A B C
Output (the order may be different because the jobs are run in parallel):
A B C
The input source can be a file:
parallel -a abc-file echo
Output: Same as above.
STDIN (standard input) can be the input source:
cat abc-file | parallel echo
Output: Same as above.
GNU parallel can take multiple input sources given on the command line. GNU parallel then generates all combinations of the input sources:
parallel echo ::: A B C ::: D E F
Output (the order may be different):
A D A E A F B D B E B F C D C E C F
The input sources can be files:
parallel -a abc-file -a def-file echo
Output: Same as above.
STDIN (standard input) can be one of the input sources using -:
cat abc-file | parallel -a - -a def-file echo
Output: Same as above.
Instead of -a files can be given after :::::
cat abc-file | parallel echo :::: - def-file
Output: Same as above.
::: and :::: can be mixed:
parallel echo ::: A B C :::: def-file
Output: Same as above.
Linking arguments from input sources
With --link you can link the input sources and get one argument from each input source:
parallel --link echo ::: A B C ::: D E F
Output (the order may be different):
A D B E C F
If one of the input sources is too short, its values will wrap:
parallel --link echo ::: A B C D E ::: F G
Output (the order may be different):
A F B G C F D G E F
For more flexible linking you can use :::+ and ::::+. They work like ::: and :::: except they link the previous input source to this input source.
This will link ABC to GHI:
parallel echo :::: abc-file :::+ G H I :::: def-file
Output (the order may be different):
A G D A G E A G F B H D B H E B H F C I D C I E C I F
This will link GHI to DEF:
parallel echo :::: abc-file ::: G H I ::::+ def-file
Output (the order may be different):
A G D A H E A I F B G D B H E B I F C G D C H E C I F
If one of the input sources is too short when using :::+ or ::::+, the rest will be ignored:
parallel echo ::: A B C D E :::+ F G
Output (the order may be different):
A F B G
GNU parallel can use other separators than ::: or ::::. This is typically useful if ::: or :::: is used in the command to run:
parallel --arg-sep ,, echo ,, A B C :::: def-file
Output (the order may be different):
A D A E A F B D B E B F C D C E C F
Changing the argument file separator:
parallel --arg-file-sep // echo ::: A B C // def-file
Output: Same as above.
GNU parallel will normally treat a full line as a single argument: It uses \n as argument delimiter. This can be changed with -d:
parallel -d _ echo :::: abc_-file
Output (the order may be different):
A B C
NUL can be given as \0:
parallel -d \0 echo :::: abc0-file
Output: Same as above.
A shorthand for -d '\0' is -0 (this will often be used to read files from find ... -print0):
parallel -0 echo :::: abc0-file
Output: Same as above.
GNU parallel can stop reading when it encounters a certain value:
parallel -E stop echo ::: A B stop C D
Output:
A B
Using --no-run-if-empty GNU parallel will skip empty lines.
(echo 1; echo; echo 2) | parallel --no-run-if-empty echo
Output:
1 2
If no command is given after parallel the arguments themselves are treated as commands:
parallel ::: ls echo foo pwd
Output (the order may be different):
[list of files in current dir] foo [/path/to/current/working/dir]
The command can be a script, a binary or a Bash function if the function is exported using export -f:
# Only works in Bash my_func() { echo in my_func $1 } export -f my_func parallel my_func ::: 1 2 3
Output (the order may be different):
in my_func 1 in my_func 2 in my_func 3
The 7 predefined replacement strings
GNU parallel has several replacement strings. If no replacement strings are used the default is to append {}:
parallel echo ::: A/B.C
Output:
A/B.C
The default replacement string is {}:
parallel echo {} ::: A/B.C
Output:
A/B.C
The replacement string {.} removes the extension:
parallel echo {.} ::: A/B.C
Output:
A/B
The replacement string {/} removes the path:
parallel echo {/} ::: A/B.C
Output:
B.C
The replacement string {//} keeps only the path:
parallel echo {//} ::: A/B.C
Output:
A
The replacement string {/.} removes the path and the extension:
parallel echo {/.} ::: A/B.C
Output:
B
The replacement string {#} gives the job number:
parallel echo {#} ::: A B C
Output (the order may be different):
1 2 3
The replacement string {%} gives the job slot number (between 1 and number of jobs to run in parallel):
parallel -j 2 echo {%} ::: A B C
Output (the order may be different and 1 and 2 may be swapped):
1 2 1
Changing the replacement strings
The replacement string {} can be changed with -I:
parallel -I ,, echo ,, ::: A/B.C
Output:
A/B.C
The replacement string {.} can be changed with --extensionreplace:
parallel --extensionreplace ,, echo ,, ::: A/B.C
Output:
A/B
The replacement string {/} can be replaced with --basenamereplace:
parallel --basenamereplace ,, echo ,, ::: A/B.C
Output:
B.C
The replacement string {//} can be changed with --dirnamereplace:
parallel --dirnamereplace ,, echo ,, ::: A/B.C
Output:
A
The replacement string {/.} can be changed with --basenameextensionreplace:
parallel --basenameextensionreplace ,, echo ,, ::: A/B.C
Output:
B
The replacement string {#} can be changed with --seqreplace:
parallel --seqreplace ,, echo ,, ::: A B C
Output (the order may be different):
1 2 3
The replacement string {%} can be changed with --slotreplace:
parallel -j2 --slotreplace ,, echo ,, ::: A B C
Output (the order may be different and 1 and 2 may be swapped):
1 2 1
Perl expression replacement string
When predefined replacement strings are not flexible enough a perl expression can be used instead. One example is to remove two extensions: foo.tar.gz becomes foo
parallel echo {= s:\.[^.]+$::;s:\.[^.]+$::; =} ::: foo.tar.gz
Output:
foo
In {= =} you can access all of GNU parallel's internal functions and variables. A few are worth mentioning.
total_jobs() returns the total number of jobs:
parallel echo Job {#} of {= $_=total_jobs() =} ::: {1..5}
Output:
Job 1 of 5 Job 2 of 5 Job 3 of 5 Job 4 of 5 Job 5 of 5
Q(...) shell quotes the string:
parallel echo {} shell quoted is {= $_=Q($_) =} ::: */!#$
Output:
*/!#$ shell quoted is \*/\!\#\$
skip() skips the job:
parallel echo {= if($_==3) { skip() } =} ::: {1..5}
Output:
1 2 4 5
@arg contains the input source variables:
parallel echo {= if($arg[1]==$arg[2]) { skip() } =} \ ::: {1..3} ::: {1..3}
Output:
1 2 1 3 2 1 2 3 3 1 3 2
If the strings {= and =} cause problems they can be replaced with --parens:
parallel --parens ,,,, echo ,, s:\.[^.]+$::;s:\.[^.]+$::; ,, \ ::: foo.tar.gz
Output:
foo
To define a shorthand replacement string use --rpl:
parallel --rpl .. s:\.[^.]+$::;s:\.[^.]+$::; echo .. \ ::: foo.tar.gz
Output: Same as above.
If the shorthand starts with { it can be used as a positional replacement string, too:
parallel --rpl {..} s:\.[^.]+$::;s:\.[^.]+$::; echo {..} ::: foo.tar.gz
Output: Same as above.
If the shorthand contains matching parenthesis the replacement string becomes a dynamic replacement string and the string in the parenthesis can be accessed as $$1. If there are multiple matching parenthesis, the matched strings can be accessed using $$2, $$3 and so on.
You can think of this as giving arguments to the replacement string. Here we give the argument .tar.gz to the replacement string {%string} which removes string:
parallel --rpl {%(.+?)} s/$$1$//; echo {%.tar.gz}.zip ::: foo.tar.gz
Output:
foo.zip
Here we give the two arguments tar.gz and zip to the replacement string {/string1/string2} which replaces string1 with string2:
parallel --rpl {/(.+?)/(.*?)} s/$$1/$$2/; echo {/tar.gz/zip} \ ::: foo.tar.gz
Output:
foo.zip
GNU parallel's 7 replacement strings are implemented as this:
--rpl {} --rpl {#} $_=$job->seq() --rpl {%} $_=$job->slot() --rpl {/} s:.*/:: --rpl {//} $Global::use{"File::Basename"} ||= eval "use File::Basename; 1;"; $_ = dirname($_); --rpl {/.} s:.*/::; s:\.[^/.]+$::; --rpl {.} s:\.[^/.]+$::
Positional replacement strings
With multiple input sources the argument from the individual input sources can be accessed with {number}:
parallel echo {1} and {2} ::: A B ::: C D
Output (the order may be different):
A and C A and D B and C B and D
The positional replacement strings can also be modified using /, //, /., and .:
parallel echo /={1/} //={1//} /.={1/.} .={1.} ::: A/B.C D/E.F
Output (the order may be different):
/=B.C //=A /.=B .=A/B /=E.F //=D /.=E .=D/E
If a position is negative, it will refer to the input source counted from behind:
parallel echo 1={1} 2={2} 3={3} -1={-1} -2={-2} -3={-3} \ ::: A B ::: C D ::: E F
Output (the order may be different):
1=A 2=C 3=E -1=E -2=C -3=A 1=A 2=C 3=F -1=F -2=C -3=A 1=A 2=D 3=E -1=E -2=D -3=A 1=A 2=D 3=F -1=F -2=D -3=A 1=B 2=C 3=E -1=E -2=C -3=B 1=B 2=C 3=F -1=F -2=C -3=B 1=B 2=D 3=E -1=E -2=D -3=B 1=B 2=D 3=F -1=F -2=D -3=B
Positional perl expression replacement string
To use a perl expression as a positional replacement string simply prepend the perl expression with number and space:
parallel echo {=2 s:\.[^.]+$::;s:\.[^.]+$::; =} {1} \ ::: bar ::: foo.tar.gz
Output:
foo bar
If a shorthand defined using --rpl starts with { it can be used as a positional replacement string, too:
parallel --rpl {..} s:\.[^.]+$::;s:\.[^.]+$::; echo {2..} {1} \ ::: bar ::: foo.tar.gz
Output: Same as above.
Input from columns
The columns in a file can be bound to positional replacement strings using --colsep. Here the columns are separated by TAB (\t):
parallel --colsep \t echo 1={1} 2={2} :::: tsv-file.tsv
Output (the order may be different):
1=f1 2=f2 1=A 2=B 1=C 2=D
Header defined replacement strings
With --header GNU parallel will use the first value of the input source as the name of the replacement string. Only the non-modified version {} is supported:
parallel --header : echo f1={f1} f2={f2} ::: f1 A B ::: f2 C D
Output (the order may be different):
f1=A f2=C f1=A f2=D f1=B f2=C f1=B f2=D
It is useful with --colsep for processing files with TAB separated values:
parallel --header : --colsep \t echo f1={f1} f2={f2} \ :::: tsv-file.tsv
Output (the order may be different):
f1=A f2=B f1=C f2=D
More pre-defined replacement strings with --plus
--plus adds the replacement strings {+/} {+.} {+..} {+...} {..} {...} {/..} {/...} {##}. The idea being that {+foo} matches the opposite of {foo} and {} = {+/}/{/} = {.}.{+.} = {+/}/{/.}.{+.} = {..}.{+..} = {+/}/{/..}.{+..} = {...}.{+...} = {+/}/{/...}.{+...}.
parallel --plus echo {} ::: dir/sub/file.ex1.ex2.ex3 parallel --plus echo {+/}/{/} ::: dir/sub/file.ex1.ex2.ex3 parallel --plus echo {.}.{+.} ::: dir/sub/file.ex1.ex2.ex3 parallel --plus echo {+/}/{/.}.{+.} ::: dir/sub/file.ex1.ex2.ex3 parallel --plus echo {..}.{+..} ::: dir/sub/file.ex1.ex2.ex3 parallel --plus echo {+/}/{/..}.{+..} ::: dir/sub/file.ex1.ex2.ex3 parallel --plus echo {...}.{+...} ::: dir/sub/file.ex1.ex2.ex3 parallel --plus echo {+/}/{/...}.{+...} ::: dir/sub/file.ex1.ex2.ex3
Output:
dir/sub/file.ex1.ex2.ex3
{##} is simply the number of jobs:
parallel --plus echo Job {#} of {##} ::: {1..5}
Output:
Job 1 of 5 Job 2 of 5 Job 3 of 5 Job 4 of 5 Job 5 of 5
Dynamic replacement strings with --plus
--plus also defines these dynamic replacement strings:
Default value is string if the argument is empty.
Substring from number till end of string.
Substring from number1 to number2.
If the argument starts with string, remove it.
If the argument ends with string, remove it.
Replace string1 with string2.
If the argument starts with string, upper case it. string must be a single letter.
If the argument contains string, upper case it. string must be a single letter.
If the argument starts with string, lower case it. string must be a single letter.
If the argument contains string, lower case it. string must be a single letter.
They are inspired from Bash:
unset myvar echo ${myvar:-myval} parallel --plus echo {:-myval} ::: "$myvar" myvar=abcAaAdef echo ${myvar:2} parallel --plus echo {:2} ::: "$myvar" echo ${myvar:2:3} parallel --plus echo {:2:3} ::: "$myvar" echo ${myvar#bc} parallel --plus echo {#bc} ::: "$myvar" echo ${myvar#abc} parallel --plus echo {#abc} ::: "$myvar" echo ${myvar%de} parallel --plus echo {%de} ::: "$myvar" echo ${myvar%def} parallel --plus echo {%def} ::: "$myvar" echo ${myvar/def/ghi} parallel --plus echo {/def/ghi} ::: "$myvar" echo ${myvar^a} parallel --plus echo {^a} ::: "$myvar" echo ${myvar^^a} parallel --plus echo {^^a} ::: "$myvar" myvar=AbcAaAdef echo ${myvar,A} parallel --plus echo {,A} ::: "$myvar" echo ${myvar,,A} parallel --plus echo {,,A} ::: "$myvar"
Output:
myval myval cAaAdef cAaAdef cAa cAa abcAaAdef abcAaAdef AaAdef AaAdef abcAaAdef abcAaAdef abcAaA abcAaA abcAaAghi abcAaAghi AbcAaAdef AbcAaAdef AbcAAAdef AbcAAAdef abcAaAdef abcAaAdef abcaaadef abcaaadef
With --xargs GNU parallel will fit as many arguments as possible on a single line:
cat num30000 | parallel --xargs echo | wc -l
Output (if you run this under Bash on GNU/Linux):
2
The 30000 arguments fitted on 2 lines.
The maximal length of a single line can be set with -s. With a maximal line length of 10000 chars 17 commands will be run:
cat num30000 | parallel --xargs -s 10000 echo | wc -l
Output:
17
For better parallelism GNU parallel can distribute the arguments between all the parallel jobs when end of file is met.
Below GNU parallel reads the last argument when generating the second job. When GNU parallel reads the last argument, it spreads all the arguments for the second job over 4 jobs instead, as 4 parallel jobs are requested.
The first job will be the same as the --xargs example above, but the second job will be split into 4 evenly sized jobs, resulting in a total of 5 jobs:
cat num30000 | parallel --jobs 4 -m echo | wc -l
Output (if you run this under Bash on GNU/Linux):
5
This is even more visible when running 4 jobs with 10 arguments. The 10 arguments are being spread over 4 jobs:
parallel --jobs 4 -m echo ::: 1 2 3 4 5 6 7 8 9 10
Output:
1 2 3 4 5 6 7 8 9 10
A replacement string can be part of a word. -m will not repeat the context:
parallel --jobs 4 -m echo pre-{}-post ::: A B C D E F G
Output (the order may be different):
pre-A B-post pre-C D-post pre-E F-post pre-G-post
To repeat the context use -X which otherwise works like -m:
parallel --jobs 4 -X echo pre-{}-post ::: A B C D E F G
Output (the order may be different):
pre-A-post pre-B-post pre-C-post pre-D-post pre-E-post pre-F-post pre-G-post
To limit the number of arguments use -N:
parallel -N3 echo ::: A B C D E F G H
Output (the order may be different):
A B C D E F G H
-N also sets the positional replacement strings:
parallel -N3 echo 1={1} 2={2} 3={3} ::: A B C D E F G H
Output (the order may be different):
1=A 2=B 3=C 1=D 2=E 3=F 1=G 2=H 3=
-N0 reads 1 argument but inserts none:
parallel -N0 echo foo ::: 1 2 3
Output:
foo foo foo
Command lines that contain special characters may need to be protected from the shell.
The perl program print @ARGV\n basically works like echo.
perl -e print "@ARGV\n" A
Output:
A
To run that in parallel the command needs to be quoted:
parallel perl -e print "@ARGV\n" ::: This wont work
Output:
[Nothing]
To quote the command use -q:
parallel -q perl -e print "@ARGV\n" ::: This works
Output (the order may be different):
This works
Or you can quote the critical part using \':
parallel perl -e \print "@ARGV\n"\ ::: This works, too
Output (the order may be different):
This works, too
GNU parallel can also \-quote full lines. Simply run this:
parallel --shellquote Warning: Input is read from the terminal. You either know what you Warning: are doing (in which case: YOU ARE AWESOME!) or you forgot Warning: ::: or :::: or to pipe data into parallel. If so Warning: consider going through the tutorial: man parallel_tutorial Warning: Press CTRL-D to exit. perl -e print "@ARGV\n" [CTRL-D]
Output:
perl\ -e\ \print\ \"@ARGV\\n\"\
This can then be used as the command:
parallel perl\ -e\ \print\ \"@ARGV\\n\"\ ::: This also works
Output (the order may be different):
This also works
Space can be trimmed on the arguments using --trim:
parallel --trim r echo pre-{}-post ::: A
Output:
pre- A-post
To trim on the left side:
parallel --trim l echo pre-{}-post ::: A
Output:
pre-A -post
To trim on the both sides:
parallel --trim lr echo pre-{}-post ::: A
Output:
pre-A-post
This tutorial uses Bash as the shell. GNU parallel respects which shell you are using, so in zsh you can do:
parallel echo \={} ::: zsh bash ls
Output:
/usr/bin/zsh /bin/bash /bin/ls
In csh you can do:
parallel set a="{}"; if( { test -d "$a" } ) echo "$a is a dir" ::: *
Output:
[somedir] is a dir
This also becomes useful if you use GNU parallel in a shell script: GNU parallel will use the same shell as the shell script.
The output can prefixed with the argument:
parallel --tag echo foo-{} ::: A B C
Output (the order may be different):
A foo-A B foo-B C foo-C
To prefix it with another string use --tagstring:
parallel --tagstring {}-bar echo foo-{} ::: A B C
Output (the order may be different):
A-bar foo-A B-bar foo-B C-bar foo-C
To see what commands will be run without running them use --dryrun:
parallel --dryrun echo {} ::: A B C
Output (the order may be different):
echo A echo B echo C
To print the command before running them use --verbose:
parallel --verbose echo {} ::: A B C
Output (the order may be different):
echo A echo B A echo C B C
GNU parallel will postpone the output until the command completes:
parallel -j2 printf "%s-start\n%s" {} {}; sleep {};printf "%s\n" -middle;echo {}-end ::: 4 2 1
Output:
2-start 2-middle 2-end 1-start 1-middle 1-end 4-start 4-middle 4-end
To get the output immediately use --ungroup:
parallel -j2 --ungroup printf "%s-start\n%s" {} {}; sleep {};printf "%s\n" -middle;echo {}-end ::: 4 2 1
Output:
4-start 42-start 2-middle 2-end 1-start 1-middle 1-end -middle 4-end
--ungroup is fast, but can cause half a line from one job to be mixed with half a line of another job. That has happened in the second line, where the line '4-middle' is mixed with '2-start'.
To avoid this use --linebuffer:
parallel -j2 --linebuffer printf "%s-start\n%s" {} {}; sleep {};printf "%s\n" -middle;echo {}-end ::: 4 2 1
Output:
4-start 2-start 2-middle 2-end 1-start 1-middle 1-end 4-middle 4-end
To force the output in the same order as the arguments use --keep-order/-k:
parallel -j2 -k printf "%s-start\n%s" {} {}; sleep {};printf "%s\n" -middle;echo {}-end ::: 4 2 1
Output:
4-start 4-middle 4-end 2-start 2-middle 2-end 1-start 1-middle 1-end
GNU parallel can save the output of each job into files:
parallel --files echo ::: A B C
Output will be similar to this:
/tmp/pAh6uWuQCg.par /tmp/opjhZCzAX4.par /tmp/W0AT_Rph2o.par
By default GNU parallel will cache the output in files in /tmp. This can be changed by setting $TMPDIR or --tmpdir:
parallel --tmpdir /var/tmp --files echo ::: A B C
Output will be similar to this:
/var/tmp/N_vk7phQRc.par /var/tmp/7zA4Ccf3wZ.par /var/tmp/LIuKgF_2LP.par
Or:
TMPDIR=/var/tmp parallel --files echo ::: A B C
Output: Same as above.
The output files can be saved in a structured way using --results:
parallel --results outdir echo ::: A B C
Output:
A B C
These files were also generated containing the standard output (stdout), standard error (stderr), and the sequence number (seq):
outdir/1/A/seq outdir/1/A/stderr outdir/1/A/stdout outdir/1/B/seq outdir/1/B/stderr outdir/1/B/stdout outdir/1/C/seq outdir/1/C/stderr outdir/1/C/stdout
--header : will take the first value as name and use that in the directory structure. This is useful if you are using multiple input sources:
parallel --header : --results outdir echo ::: f1 A B ::: f2 C D
Generated files:
outdir/f1/A/f2/C/seq outdir/f1/A/f2/C/stderr outdir/f1/A/f2/C/stdout outdir/f1/A/f2/D/seq outdir/f1/A/f2/D/stderr outdir/f1/A/f2/D/stdout outdir/f1/B/f2/C/seq outdir/f1/B/f2/C/stderr outdir/f1/B/f2/C/stdout outdir/f1/B/f2/D/seq outdir/f1/B/f2/D/stderr outdir/f1/B/f2/D/stdout
The directories are named after the variables and their values.
The number of concurrent jobs is given with --jobs/-j:
/usr/bin/time parallel -N0 -j64 sleep 1 :::: num128
With 64 jobs in parallel the 128 sleeps will take 2-8 seconds to run - depending on how fast your machine is.
By default --jobs is the same as the number of CPU cores. So this:
/usr/bin/time parallel -N0 sleep 1 :::: num128
should take twice the time of running 2 jobs per CPU core:
/usr/bin/time parallel -N0 --jobs 200% sleep 1 :::: num128
--jobs 0 will run as many jobs in parallel as possible:
/usr/bin/time parallel -N0 --jobs 0 sleep 1 :::: num128
which should take 1-7 seconds depending on how fast your machine is.
--jobs can read from a file which is re-read when a job finishes:
echo 50% > my_jobs /usr/bin/time parallel -N0 --jobs my_jobs sleep 1 :::: num128 & sleep 1 echo 0 > my_jobs wait
The first second only 50% of the CPU cores will run a job. Then 0 is put into my_jobs and then the rest of the jobs will be started in parallel.
Instead of basing the percentage on the number of CPU cores GNU parallel can base it on the number of CPUs:
parallel --use-cpus-instead-of-cores -N0 sleep 1 :::: num8
If you have many jobs (e.g. by multiple combinations of input sources), it can be handy to shuffle the jobs, so you get different values run. Use --shuf for that:
parallel --shuf echo ::: 1 2 3 ::: a b c ::: A B C
Output:
All combinations but different order for each run.
GNU parallel can ask the user if a command should be run using --interactive:
parallel --interactive echo ::: 1 2 3
Output:
echo 1 ?...y echo 2 ?...n 1 echo 3 ?...y 3
GNU parallel can be used to put arguments on the command line for an interactive command such as emacs to edit one file at a time:
parallel --tty emacs ::: 1 2 3
Or give multiple argument in one go to open multiple files:
parallel -X --tty vi ::: 1 2 3
Using --tmux GNU parallel can start a terminal for every job run:
seq 10 20 | parallel --tmux echo start {}; sleep {}; echo done {}
This will tell you to run something similar to:
tmux -S /tmp/tmsrPrO0 attach
Using normal tmux keystrokes (CTRL-b n or CTRL-b p) you can cycle between windows of the running jobs. When a job is finished it will pause for 10 seconds before closing the window.
Some jobs do heavy I/O when they start. To avoid a thundering herd GNU parallel can delay starting new jobs. --delay X will make sure there is at least X seconds between each start:
parallel --delay 2.5 echo Starting {}\;date ::: 1 2 3
Output:
Starting 1 Thu Aug 15 16:24:33 CEST 2013 Starting 2 Thu Aug 15 16:24:35 CEST 2013 Starting 3 Thu Aug 15 16:24:38 CEST 2013
If jobs taking more than a certain amount of time are known to fail, they can be stopped with --timeout. The accuracy of --timeout is 2 seconds:
parallel --timeout 4.1 sleep {}\; echo {} ::: 2 4 6 8
Output:
2 4
GNU parallel can compute the median runtime for jobs and kill those that take more than 200% of the median runtime:
parallel --timeout 200% sleep {}\; echo {} ::: 2.1 2.2 3 7 2.3
Output:
2.1 2.2 3 2.3
Based on the runtime of completed jobs GNU parallel can estimate the total runtime:
parallel --eta sleep ::: 1 3 2 2 1 3 3 2 1
Output:
Computers / CPU cores / Max jobs to run 1:local / 2 / 2 Computer:jobs running/jobs completed/%of started jobs/ Average seconds to complete ETA: 2s 0left 1.11avg local:0/9/100%/1.1s
GNU parallel can give progress information with --progress:
parallel --progress sleep ::: 1 3 2 2 1 3 3 2 1
Output:
Computers / CPU cores / Max jobs to run 1:local / 2 / 2 Computer:jobs running/jobs completed/%of started jobs/ Average seconds to complete local:0/9/100%/1.1s
A progress bar can be shown with --bar:
parallel --bar sleep ::: 1 3 2 2 1 3 3 2 1
And a graphic bar can be shown with --bar and zenity:
seq 1000 | parallel -j10 --bar (echo -n {};sleep 0.1) \ 2> >(perl -pe BEGIN{$/="\r";$|=1};s/\r/\n/g | zenity --progress --auto-kill --auto-close)
A logfile of the jobs completed so far can be generated with --joblog:
parallel --joblog /tmp/log exit ::: 1 2 3 0 cat /tmp/log
Output:
Seq Host Starttime Runtime Send Receive Exitval Signal Command 1 : 1376577364.974 0.008 0 0 1 0 exit 1 2 : 1376577364.982 0.013 0 0 2 0 exit 2 3 : 1376577364.990 0.013 0 0 3 0 exit 3 4 : 1376577365.003 0.003 0 0 0 0 exit 0
The log contains the job sequence, which host the job was run on, the start time and run time, how much data was transferred, the exit value, the signal that killed the job, and finally the command being run.
With a joblog GNU parallel can be stopped and later pickup where it left off. It it important that the input of the completed jobs is unchanged.
parallel --joblog /tmp/log exit ::: 1 2 3 0 cat /tmp/log parallel --resume --joblog /tmp/log exit ::: 1 2 3 0 0 0 cat /tmp/log
Output:
Seq Host Starttime Runtime Send Receive Exitval Signal Command 1 : 1376580069.544 0.008 0 0 1 0 exit 1 2 : 1376580069.552 0.009 0 0 2 0 exit 2 3 : 1376580069.560 0.012 0 0 3 0 exit 3 4 : 1376580069.571 0.005 0 0 0 0 exit 0 Seq Host Starttime Runtime Send Receive Exitval Signal Command 1 : 1376580069.544 0.008 0 0 1 0 exit 1 2 : 1376580069.552 0.009 0 0 2 0 exit 2 3 : 1376580069.560 0.012 0 0 3 0 exit 3 4 : 1376580069.571 0.005 0 0 0 0 exit 0 5 : 1376580070.028 0.009 0 0 0 0 exit 0 6 : 1376580070.038 0.007 0 0 0 0 exit 0
Note how the start time of the last 2 jobs is clearly different from the second run.
With --resume-failed GNU parallel will re-run the jobs that failed:
parallel --resume-failed --joblog /tmp/log exit ::: 1 2 3 0 0 0 cat /tmp/log
Output:
Seq Host Starttime Runtime Send Receive Exitval Signal Command 1 : 1376580069.544 0.008 0 0 1 0 exit 1 2 : 1376580069.552 0.009 0 0 2 0 exit 2 3 : 1376580069.560 0.012 0 0 3 0 exit 3 4 : 1376580069.571 0.005 0 0 0 0 exit 0 5 : 1376580070.028 0.009 0 0 0 0 exit 0 6 : 1376580070.038 0.007 0 0 0 0 exit 0 1 : 1376580154.433 0.010 0 0 1 0 exit 1 2 : 1376580154.444 0.022 0 0 2 0 exit 2 3 : 1376580154.466 0.005 0 0 3 0 exit 3
Note how seq 1 2 3 have been repeated because they had exit value different from 0.
--retry-failed does almost the same as --resume-failed. Where --resume-failed reads the commands from the command line (and ignores the commands in the joblog), --retry-failed ignores the command line and reruns the commands mentioned in the joblog.
parallel --retry-failed --joblog /tmp/log cat /tmp/log
Output:
Seq Host Starttime Runtime Send Receive Exitval Signal Command 1 : 1376580069.544 0.008 0 0 1 0 exit 1 2 : 1376580069.552 0.009 0 0 2 0 exit 2 3 : 1376580069.560 0.012 0 0 3 0 exit 3 4 : 1376580069.571 0.005 0 0 0 0 exit 0 5 : 1376580070.028 0.009 0 0 0 0 exit 0 6 : 1376580070.038 0.007 0 0 0 0 exit 0 1 : 1376580154.433 0.010 0 0 1 0 exit 1 2 : 1376580154.444 0.022 0 0 2 0 exit 2 3 : 1376580154.466 0.005 0 0 3 0 exit 3 1 : 1376580164.633 0.010 0 0 1 0 exit 1 2 : 1376580164.644 0.022 0 0 2 0 exit 2 3 : 1376580164.666 0.005 0 0 3 0 exit 3
Unconditional termination
By default GNU parallel will wait for all jobs to finish before exiting.
If you send GNU parallel the TERM signal, GNU parallel will stop spawning new jobs and wait for the remaining jobs to finish. If you send GNU parallel the TERM signal again, GNU parallel will kill all running jobs and exit.
Termination dependent on job status
For certain jobs there is no need to continue if one of the jobs fails and has an exit code different from 0. GNU parallel will stop spawning new jobs with --halt soon,fail=1:
parallel -j2 --halt soon,fail=1 echo {}\; exit {} ::: 0 0 1 2 3
Output:
0 0 1 parallel: This job failed: echo 1; exit 1 parallel: Starting no more jobs. Waiting for 1 jobs to finish. 2
With --halt now,fail=1 the running jobs will be killed immediately:
parallel -j2 --halt now,fail=1 echo {}\; exit {} ::: 0 0 1 2 3
Output:
0 0 1 parallel: This job failed: echo 1; exit 1
If --halt is given a percentage this percentage of the jobs must fail before GNU parallel stops spawning more jobs:
parallel -j2 --halt soon,fail=20% echo {}\; exit {} \ ::: 0 1 2 3 4 5 6 7 8 9
Output:
0 1 parallel: This job failed: echo 1; exit 1 2 parallel: This job failed: echo 2; exit 2 parallel: Starting no more jobs. Waiting for 1 jobs to finish. 3 parallel: This job failed: echo 3; exit 3
If you are looking for success instead of failures, you can use success. This will finish as soon as the first job succeeds:
parallel -j2 --halt now,success=1 echo {}\; exit {} ::: 1 2 3 0 4 5 6
Output:
1 2 3 0 parallel: This job succeeded: echo 0; exit 0
GNU parallel can retry the command with --retries. This is useful if a command fails for unknown reasons now and then.
parallel -k --retries 3 \ echo tried {} >>/tmp/runs; echo completed {}; exit {} ::: 1 2 0 cat /tmp/runs
Output:
completed 1 completed 2 completed 0 tried 1 tried 2 tried 1 tried 2 tried 1 tried 2 tried 0
Note how job 1 and 2 were tried 3 times, but 0 was not retried because it had exit code 0.
Termination signals (advanced)
Using --termseq you can control which signals are sent when killing children. Normally children will be killed by sending them SIGTERM, waiting 200 ms, then another SIGTERM, waiting 100 ms, then another SIGTERM, waiting 50 ms, then a SIGKILL, finally waiting 25 ms before giving up. It looks like this:
show_signals() { perl -e for(keys %SIG) { $SIG{$_} = eval "sub { print \"Got $_\\n\"; }"; } while(1){sleep 1} } export -f show_signals echo | parallel --termseq TERM,200,TERM,100,TERM,50,KILL,25 \ -u --timeout 1 show_signals
Output:
Got TERM Got TERM Got TERM
Or just:
echo | parallel -u --timeout 1 show_signals
Output: Same as above.
You can change this to SIGINT, SIGTERM, SIGKILL:
echo | parallel --termseq INT,200,TERM,100,KILL,25 \ -u --timeout 1 show_signals
Output:
Got INT Got TERM
The SIGKILL does not show because it cannot be caught, and thus the child dies.
To avoid overloading systems GNU parallel can look at the system load before starting another job:
parallel --load 100% echo load is less than {} job per cpu ::: 1
Output:
[when then load is less than the number of cpu cores] load is less than 1 job per cpu
GNU parallel can also check if the system is swapping.
parallel --noswap echo the system is not swapping ::: now
Output:
[when then system is not swapping] the system is not swapping now
Some jobs need a lot of memory, and should only be started when there is enough memory free. Using --memfree GNU parallel can check if there is enough memory free. Additionally, GNU parallel will kill off the youngest job if the memory free falls below 50% of the size. The killed job will put back on the queue and retried later.
parallel --memfree 1G echo will run if more than 1 GB is ::: free
GNU parallel can run the jobs with a nice value. This will work both locally and remotely.
parallel --nice 17 echo this is being run with nice -n ::: 17
Output:
this is being run with nice -n 17
GNU parallel can run jobs on remote servers. It uses ssh to communicate with the remote machines.
The most basic sshlogin is -S host:
parallel -S $SERVER1 echo running on ::: $SERVER1
Output:
running on [$SERVER1]
To use a different username prepend the server with username@:
parallel -S username@$SERVER1 echo running on ::: username@$SERVER1
Output:
running on [username@$SERVER1]
The special sshlogin : is the local machine:
parallel -S : echo running on ::: the_local_machine
Output:
running on the_local_machine
If ssh is not in $PATH it can be prepended to $SERVER1:
parallel -S /usr/bin/ssh $SERVER1 echo custom ::: ssh
Output:
custom ssh
The ssh command can also be given using --ssh:
parallel --ssh /usr/bin/ssh -S $SERVER1 echo custom ::: ssh
or by setting $PARALLEL_SSH:
export PARALLEL_SSH=/usr/bin/ssh parallel -S $SERVER1 echo custom ::: ssh
Several servers can be given using multiple -S:
parallel -S $SERVER1 -S $SERVER2 echo ::: running on more hosts
Output (the order may be different):
running on more hosts
Or they can be separated by ,:
parallel -S $SERVER1,$SERVER2 echo ::: running on more hosts
Output: Same as above.
Or newline:
# This gives a \n between $SERVER1 and $SERVER2 SERVERS="`echo $SERVER1; echo $SERVER2`" parallel -S "$SERVERS" echo ::: running on more hosts
They can also be read from a file (replace user@ with the user on $SERVER2):
echo $SERVER1 > nodefile # Force 4 cores, special ssh-command, username echo 4//usr/bin/ssh user@$SERVER2 >> nodefile parallel --sshloginfile nodefile echo ::: running on more hosts
Output: Same as above.
Every time a job finished, the --sshloginfile will be re-read, so it is possible to both add and remove hosts while running.
The special --sshloginfile .. reads from ~/.parallel/sshloginfile.
To force GNU parallel to treat a server having a given number of CPU cores prepend the number of core followed by / to the sshlogin:
parallel -S 4/$SERVER1 echo force {} cpus on server ::: 4
Output:
force 4 cpus on server
Servers can be put into groups by prepending @groupname to the server and the group can then be selected by appending @groupname to the argument if using --hostgroup:
parallel --hostgroup -S @grp1/$SERVER1 -S @grp2/$SERVER2 echo {} \ ::: run_on_grp1@grp1 run_on_grp2@grp2
Output:
run_on_grp1 run_on_grp2
A host can be in multiple groups by separating the groups with +, and you can force GNU parallel to limit the groups on which the command can be run with -S @groupname:
parallel -S @grp1 -S @grp1+grp2/$SERVER1 -S @grp2/SERVER2 echo {} \ ::: run_on_grp1 also_grp1
Output:
run_on_grp1 also_grp1
GNU parallel can transfer the files to be processed to the remote host. It does that using rsync.
echo This is input_file > input_file parallel -S $SERVER1 --transferfile {} cat ::: input_file
Output:
This is input_file
If the files are processed into another file, the resulting file can be transferred back:
echo This is input_file > input_file parallel -S $SERVER1 --transferfile {} --return {}.out \ cat {} ">"{}.out ::: input_file cat input_file.out
Output: Same as above.
To remove the input and output file on the remote server use --cleanup:
echo This is input_file > input_file parallel -S $SERVER1 --transferfile {} --return {}.out --cleanup \ cat {} ">"{}.out ::: input_file cat input_file.out
Output: Same as above.
There is a shorthand for --transferfile {} --return --cleanup called --trc:
echo This is input_file > input_file parallel -S $SERVER1 --trc {}.out cat {} ">"{}.out ::: input_file cat input_file.out
Output: Same as above.
Some jobs need a common database for all jobs. GNU parallel can transfer that using --basefile which will transfer the file before the first job:
echo common data > common_file parallel --basefile common_file -S $SERVER1 \ cat common_file\; echo {} ::: foo
Output:
common data foo
To remove it from the remote host after the last job use --cleanup.
The default working dir on the remote machines is the login dir. This can be changed with --workdir mydir.
Files transferred using --transferfile and --return will be relative to mydir on remote computers, and the command will be executed in the dir mydir.
The special mydir value ... will create working dirs under ~/.parallel/tmp on the remote computers. If --cleanup is given these dirs will be removed.
The special mydir value . uses the current working dir. If the current working dir is beneath your home dir, the value . is treated as the relative path to your home dir. This means that if your home dir is different on remote computers (e.g. if your login is different) the relative path will still be relative to your home dir.
parallel -S $SERVER1 pwd ::: "" parallel --workdir . -S $SERVER1 pwd ::: "" parallel --workdir ... -S $SERVER1 pwd ::: ""
Output:
[the login dir on $SERVER1] [current dir relative on $SERVER1] [a dir in ~/.parallel/tmp/...]
If many jobs are started on the same server, sshd can be overloaded. GNU parallel can insert a delay between each job run on the same server:
parallel -S $SERVER1 --sshdelay 0.2 echo ::: 1 2 3
Output (the order may be different):
1 2 3
sshd will be less overloaded if using --controlmaster, which will multiplex ssh connections:
parallel --controlmaster -S $SERVER1 echo ::: 1 2 3
Output: Same as above.
In clusters with many hosts a few of them are often down. GNU parallel can ignore those hosts. In this case the host 173.194.32.46 is down:
parallel --filter-hosts -S 173.194.32.46,$SERVER1 echo ::: bar
Output:
bar
GNU parallel can run the same command on all the hosts:
parallel --onall -S $SERVER1,$SERVER2 echo ::: foo bar
Output (the order may be different):
foo bar foo bar
Often you will just want to run a single command on all hosts with out arguments. --nonall is a no argument --onall:
parallel --nonall -S $SERVER1,$SERVER2 echo foo bar
Output:
foo bar foo bar
When --tag is used with --nonall and --onall the --tagstring is the host:
parallel --nonall --tag -S $SERVER1,$SERVER2 echo foo bar
Output (the order may be different):
$SERVER1 foo bar $SERVER2 foo bar
--jobs sets the number of servers to log in to in parallel.
env_parallel is a shell function that transfers all aliases, functions, variables, and arrays. You active it by running:
source `which env_parallel.bash`
Replace bash with the shell you use.
Now you can use env_parallel instead of parallel and still have your environment:
alias myecho=echo myvar="Joes var is" env_parallel -S $SERVER1 myecho $myvar ::: green
Output:
Joes var is green
The disadvantage is that if your environment is huge env_parallel will fail.
When env_parallel fails, you can still use --env to tell GNU parallel to transfer an environment variable to the remote system.
MYVAR=foo bar export MYVAR parallel --env MYVAR -S $SERVER1 echo $MYVAR ::: baz
Output:
foo bar baz
This works for functions, too, if your shell is Bash:
# This only works in Bash my_func() { echo in my_func $1 } export -f my_func parallel --env my_func -S $SERVER1 my_func ::: baz
Output:
in my_func baz
GNU parallel can copy all user defined variables and functions to the remote system. It just needs to record which ones to ignore in ~/.parallel/ignored_vars. Do that by running this once:
parallel --record-env cat ~/.parallel/ignored_vars
Output:
[list of variables to ignore - including $PATH and $HOME]
Now all other variables and functions defined will be copied when using --env _.
# The function is only copied if using Bash my_func2() { echo in my_func2 $VAR $1 } export -f my_func2 VAR=foo export VAR parallel --env _ -S $SERVER1 echo $VAR; my_func2 ::: bar
Output:
foo in my_func2 foo bar
If you use env_parallel the variables, functions, and aliases do not even need to be exported to be copied:
NOT=not exported var alias myecho=echo not_ex() { myecho in not_exported_func $NOT $1 } env_parallel --env _ -S $SERVER1 echo $NOT; not_ex ::: bar
Output:
not exported var in not_exported_func not exported var bar
--verbose will show the command that would be run on the local machine.
When using --cat, --pipepart, or when a job is run on a remote machine, the command is wrapped with helper scripts. -vv shows all of this.
parallel -vv --pipepart --block 1M wc :::: num30000
Output:
<num30000 perl -e while(@ARGV) { sysseek(STDIN,shift,0) || die; $left = shift; while($read = sysread(STDIN,$buf, ($left > 131072 ? 131072 : $left))){ $left -= $read; syswrite(STDOUT,$buf); } } 0 0 0 168894 | (wc) 30000 30000 168894
When the command gets more complex, the output is so hard to read, that it is only useful for debugging:
my_func3() { echo in my_func $1 > $1.out } export -f my_func3 parallel -vv --workdir ... --nice 17 --env _ --trc {}.out \ -S $SERVER1 my_func3 {} ::: abc-file
Output will be similar to:
( ssh server -- mkdir -p ./.parallel/tmp/aspire-1928520-1;rsync --protocol 30 -rlDzR -essh ./abc-file server:./.parallel/tmp/aspire-1928520-1 );ssh server -- exec perl -e \@GNU_Parallel=("use","IPC::Open3;","use","MIME::Base64"); eval"@GNU_Parallel";my$eval=decode_base64(join"",@ARGV);eval$eval;\ c3lzdGVtKCJta2RpciIsIi1wIiwiLS0iLCIucGFyYWxsZWwvdG1wL2FzcGlyZS0xOTI4N TsgY2hkaXIgIi5wYXJhbGxlbC90bXAvYXNwaXJlLTE5Mjg1MjAtMSIgfHxwcmludChTVE BhcmFsbGVsOiBDYW5ub3QgY2hkaXIgdG8gLnBhcmFsbGVsL3RtcC9hc3BpcmUtMTkyODU iKSAmJiBleGl0IDI1NTskRU5WeyJPTERQV0QifT0iL2hvbWUvdGFuZ2UvcHJpdmF0L3Bh IjskRU5WeyJQQVJBTExFTF9QSUQifT0iMTkyODUyMCI7JEVOVnsiUEFSQUxMRUxfU0VRI 0BiYXNoX2Z1bmN0aW9ucz1xdyhteV9mdW5jMyk7IGlmKCRFTlZ7IlNIRUxMIn09fi9jc2 ByaW50IFNUREVSUiAiQ1NIL1RDU0ggRE8gTk9UIFNVUFBPUlQgbmV3bGluZXMgSU4gVkF TL0ZVTkNUSU9OUy4gVW5zZXQgQGJhc2hfZnVuY3Rpb25zXG4iOyBleGVjICJmYWxzZSI7 YXNoZnVuYyA9ICJteV9mdW5jMygpIHsgIGVjaG8gaW4gbXlfZnVuYyBcJDEgPiBcJDEub Xhwb3J0IC1mIG15X2Z1bmMzID4vZGV2L251bGw7IjtAQVJHVj0ibXlfZnVuYzMgYWJjLW RzaGVsbD0iJEVOVntTSEVMTH0iOyR0bXBkaXI9Ii90bXAiOyRuaWNlPTE3O2RveyRFTlZ MRUxfVE1QfT0kdG1wZGlyLiIvcGFyIi5qb2luIiIsbWFweygwLi45LCJhIi4uInoiLCJB KVtyYW5kKDYyKV19KDEuLjUpO313aGlsZSgtZSRFTlZ7UEFSQUxMRUxfVE1QfSk7JFNJ fT1zdWJ7JGRvbmU9MTt9OyRwaWQ9Zm9yazt1bmxlc3MoJHBpZCl7c2V0cGdycDtldmFse W9yaXR5KDAsMCwkbmljZSl9O2V4ZWMkc2hlbGwsIi1jIiwoJGJhc2hmdW5jLiJAQVJHVi JleGVjOiQhXG4iO31kb3skcz0kczwxPzAuMDAxKyRzKjEuMDM6JHM7c2VsZWN0KHVuZGV mLHVuZGVmLCRzKTt9dW50aWwoJGRvbmV8fGdldHBwaWQ9PTEpO2tpbGwoU0lHSFVQLC0k dW5sZXNzJGRvbmU7d2FpdDtleGl0KCQ/JjEyNz8xMjgrKCQ/JjEyNyk6MSskPz4+OCk=; _EXIT_status=$?; mkdir -p ./.; rsync --protocol 30 --rsync-path=cd\ ./.parallel/tmp/aspire-1928520-1/./.\;\ rsync -rlDzR -essh server:./abc-file.out ./.;ssh server -- \(rm\ -f\ ./.parallel/tmp/aspire-1928520-1/abc-file\;\ sh\ -c\ \rmdir\ ./.parallel/tmp/aspire-1928520-1/\ ./.parallel/tmp/\ ./.parallel/\ 2\>/dev/null\\;rm\ -rf\ ./.parallel/tmp/aspire-1928520-1\;\);ssh server -- \(rm\ -f\ ./.parallel/tmp/aspire-1928520-1/abc-file.out\;\ sh\ -c\ \rmdir\ ./.parallel/tmp/aspire-1928520-1/\ ./.parallel/tmp/\ ./.parallel/\ 2\>/dev/null\\;rm\ -rf\ ./.parallel/tmp/aspire-1928520-1\;\);ssh server -- rm -rf .parallel/tmp/aspire-1928520-1; exit $_EXIT_status;
GNU parset will set shell variables to the output of GNU parallel. GNU parset has one important limitation: It cannot be part of a pipe. In particular this means it cannot read anything from standard input (stdin) or pipe output to another program.
To use GNU parset prepend command with destination variables:
parset myvar1,myvar2 echo ::: a b echo $myvar1 echo $myvar2
Output:
a b
If you only give a single variable, it will be treated as an array:
parset myarray seq {} 5 ::: 1 2 3 echo "${myarray[1]}"
Output:
2 3 4 5
The commands to run can be an array:
cmd=("echo <<joe \"double space\" cartoon>>" "pwd") parset data ::: "${cmd[@]}" echo "${data[0]}" echo "${data[1]}"
Output:
<<joe "double space" cartoon>> [current dir]
GNU parallel can save into an SQL base. Point GNU parallel to a table and it will put the joblog there together with the variables and the output each in their own column.
The simplest is to use a CSV file as the storage table:
parallel --sqlandworker csv:///%2Ftmp/log.csv \ seq ::: 10 ::: 12 13 14 cat /tmp/log.csv
Note how '/' in the path must be written as %2F.
Output will be similar to:
Seq,Host,Starttime,JobRuntime,Send,Receive,Exitval,_Signal, Command,V1,V2,Stdout,Stderr 1,:,1458254498.254,0.069,0,9,0,0,"seq 10 12",10,12,"10 11 12 ", 2,:,1458254498.278,0.080,0,12,0,0,"seq 10 13",10,13,"10 11 12 13 ", 3,:,1458254498.301,0.083,0,15,0,0,"seq 10 14",10,14,"10 11 12 13 14 ",
A proper CSV reader (like LibreOffice or R's read.csv) will read this format correctly - even with fields containing newlines as above.
If the output is big you may want to put it into files using --results:
parallel --results outdir --sqlandworker csv:///%2Ftmp/log2.csv \ seq ::: 10 ::: 12 13 14 cat /tmp/log2.csv
Output will be similar to:
Seq,Host,Starttime,JobRuntime,Send,Receive,Exitval,_Signal, Command,V1,V2,Stdout,Stderr 1,:,1458824738.287,0.029,0,9,0,0, "seq 10 12",10,12,outdir/1/10/2/12/stdout,outdir/1/10/2/12/stderr 2,:,1458824738.298,0.025,0,12,0,0, "seq 10 13",10,13,outdir/1/10/2/13/stdout,outdir/1/10/2/13/stderr 3,:,1458824738.309,0.026,0,15,0,0, "seq 10 14",10,14,outdir/1/10/2/14/stdout,outdir/1/10/2/14/stderr
The CSV file is an example of a DBURL.
GNU parallel uses a DBURL to address the table. A DBURL has this format:
vendor://[[user][:password]@][host][:port]/[database[/table]
Example:
mysql://scott:tiger@my.example.com/mydatabase/mytable postgresql://scott:tiger@pg.example.com/mydatabase/mytable sqlite3:///%2Ftmp%2Fmydatabase/mytable csv:///%2Ftmp/log.csv
To refer to /tmp/mydatabase with sqlite or csv you need to encode the / as %2F.
Run a job using sqlite on mytable in /tmp/mydatabase:
DBURL=sqlite3:///%2Ftmp%2Fmydatabase DBURLTABLE=$DBURL/mytable parallel --sqlandworker $DBURLTABLE echo ::: foo bar ::: baz quuz
To see the result:
sql $DBURL SELECT * FROM mytable ORDER BY Seq;
Output will be similar to:
Seq|Host|Starttime|JobRuntime|Send|Receive|Exitval|_Signal| Command|V1|V2|Stdout|Stderr 1|:|1451619638.903|0.806||8|0|0|echo foo baz|foo|baz|foo baz | 2|:|1451619639.265|1.54||9|0|0|echo foo quuz|foo|quuz|foo quuz | 3|:|1451619640.378|1.43||8|0|0|echo bar baz|bar|baz|bar baz | 4|:|1451619641.473|0.958||9|0|0|echo bar quuz|bar|quuz|bar quuz |
The first columns are well known from --joblog. V1 and V2 are data from the input sources. Stdout and Stderr are standard output and standard error, respectively.
Using an SQL base as storage costs overhead in the order of 1 second per job.
One of the situations where it makes sense is if you have multiple workers.
You can then have a single master machine that submits jobs to the SQL base (but does not do any of the work):
parallel --sqlmaster $DBURLTABLE echo ::: foo bar ::: baz quuz
On the worker machines you run exactly the same command except you replace --sqlmaster with --sqlworker.
parallel --sqlworker $DBURLTABLE echo ::: foo bar ::: baz quuz
To run a master and a worker on the same machine use --sqlandworker as shown earlier.
The --pipe functionality puts GNU parallel in a different mode: Instead of treating the data on stdin (standard input) as arguments for a command to run, the data will be sent to stdin (standard input) of the command.
The typical situation is:
command_A | command_B | command_C
where command_B is slow, and you want to speed up command_B.
By default GNU parallel will start an instance of command_B, read a chunk of 1 MB, and pass that to the instance. Then start another instance, read another chunk, and pass that to the second instance.
cat num1000000 | parallel --pipe wc
Output (the order may be different):
165668 165668 1048571 149797 149797 1048579 149796 149796 1048572 149797 149797 1048579 149797 149797 1048579 149796 149796 1048572 85349 85349 597444
The size of the chunk is not exactly 1 MB because GNU parallel only passes full lines - never half a line, thus the blocksize is only 1 MB on average. You can change the block size to 2 MB with --block:
cat num1000000 | parallel --pipe --block 2M wc
Output (the order may be different):
315465 315465 2097150 299593 299593 2097151 299593 299593 2097151 85349 85349 597444
GNU parallel treats each line as a record. If the order of records is unimportant (e.g. you need all lines processed, but you do not care which is processed first), then you can use --roundrobin. Without --roundrobin GNU parallel will start a command per block; with --roundrobin only the requested number of jobs will be started (--jobs). The records will then be distributed between the running jobs:
cat num1000000 | parallel --pipe -j4 --roundrobin wc
Output will be similar to:
149797 149797 1048579 299593 299593 2097151 315465 315465 2097150 235145 235145 1646016
One of the 4 instances got a single record, 2 instances got 2 full records each, and one instance got 1 full and 1 partial record.
GNU parallel sees the input as records. The default record is a single line.
Using -N140000 GNU parallel will read 140000 records at a time:
cat num1000000 | parallel --pipe -N140000 wc
Output (the order may be different):
140000 140000 868895 140000 140000 980000 140000 140000 980000 140000 140000 980000 140000 140000 980000 140000 140000 980000 140000 140000 980000 20000 20000 140001
Note how that the last job could not get the full 140000 lines, but only 20000 lines.
If a record is 75 lines -L can be used:
cat num1000000 | parallel --pipe -L75 wc
Output (the order may be different):
165600 165600 1048095 149850 149850 1048950 149775 149775 1048425 149775 149775 1048425 149850 149850 1048950 149775 149775 1048425 85350 85350 597450 25 25 176
Note how GNU parallel still reads a block of around 1 MB; but instead of passing full lines to wc it passes full 75 lines at a time. This of course does not hold for the last job (which in this case got 25 lines).
Fixed length records can be processed by setting --recend '' and --block recordsize. A header of size n can be processed with --header .{n}.
Here is how to process a file with a 4-byte header and a 3-byte record size:
cat fixedlen | parallel --pipe --header .{4} --block 3 --recend \ echo start; cat; echo
Output:
start HHHHAAA start HHHHCCC start HHHHBBB
It may be more efficient to increase --block to a multiplum of the record size.
GNU parallel uses separators to determine where two records split.
--recstart gives the string that starts a record; --recend gives the string that ends a record. The default is --recend '\n' (newline).
If both --recend and --recstart are given, then the record will only split if the recend string is immediately followed by the recstart string.
Here the --recend is set to ', ':
echo /foo, bar/, /baz, qux/, | \ parallel -kN1 --recend , --pipe echo JOB{#}\;cat\;echo END
Output:
JOB1 /foo, END JOB2 bar/, END JOB3 /baz, END JOB4 qux/, END
Here the --recstart is set to /:
echo /foo, bar/, /baz, qux/, | \ parallel -kN1 --recstart / --pipe echo JOB{#}\;cat\;echo END
Output:
JOB1 /foo, barEND JOB2 /, END JOB3 /baz, quxEND JOB4 /, END
Here both --recend and --recstart are set:
echo /foo, bar/, /baz, qux/, | \ parallel -kN1 --recend , --recstart / --pipe \ echo JOB{#}\;cat\;echo END
Output:
JOB1 /foo, bar/, END JOB2 /baz, qux/, END
Note the difference between setting one string and setting both strings.
With --regexp the --recend and --recstart will be treated as a regular expression:
echo foo,bar,_baz,__qux, | \ parallel -kN1 --regexp --recend ,_+ --pipe \ echo JOB{#}\;cat\;echo END
Output:
JOB1 foo,bar,_END JOB2 baz,__END JOB3 qux, END
GNU parallel can remove the record separators with --remove-rec-sep/--rrs:
echo foo,bar,_baz,__qux, | \ parallel -kN1 --rrs --regexp --recend ,_+ --pipe \ echo JOB{#}\;cat\;echo END
Output:
JOB1 foo,barEND JOB2 bazEND JOB3 qux, END
If the input data has a header, the header can be repeated for each job by matching the header with --header. If headers start with % you can do this:
cat num_%header | \ parallel --header (%.*\n)* --pipe -N3 echo JOB{#}\;cat
Output (the order may be different):
JOB1 %head1 %head2 1 2 3 JOB2 %head1 %head2 4 5 6 JOB3 %head1 %head2 7 8 9 JOB4 %head1 %head2 10
If the header is 2 lines, --header 2 will work:
cat num_%header | parallel --header 2 --pipe -N3 echo JOB{#}\;cat
Output: Same as above.
--pipe is not very efficient. It maxes out at around 500 MB/s. --pipepart can easily deliver 5 GB/s. But there are a few limitations. The input has to be a normal file (not a pipe) given by -a or :::: and -L/-l/-N do not work. --recend and --recstart, however, do work, and records can often be split on that alone.
parallel --pipepart -a num1000000 --block 3m wc
Output (the order may be different):
444443 444444 3000002 428572 428572 3000004 126985 126984 888890
GNU parallel is often called as this:
cat input_file | parallel command
With --shebang the input_file and parallel can be combined into the same script.
UNIX shell scripts start with a shebang line like this:
#!/bin/bash
GNU parallel can do that, too. With --shebang the arguments can be listed in the file. The parallel command is the first line of the script:
#!/usr/bin/parallel --shebang -r echo foo bar baz
Output (the order may be different):
foo bar baz
GNU parallel is often called as this:
cat input_file | parallel command parallel command ::: foo bar
If command is a script, parallel can be combined into a single file so this will run the script in parallel:
cat input_file | command command foo bar
This perl script perl_echo works like echo:
#!/usr/bin/perl print "@ARGV\n"
It can be called as this:
parallel perl_echo ::: foo bar
By changing the #!-line it can be run in parallel:
#!/usr/bin/parallel --shebang-wrap /usr/bin/perl print "@ARGV\n"
Thus this will work:
perl_echo foo bar
Output (the order may be different):
foo bar
This technique can be used for:
#!/usr/bin/parallel --shebang-wrap /usr/bin/perl print "Arguments @ARGV\n";
#!/usr/bin/parallel --shebang-wrap /usr/bin/python import sys print Arguments, str(sys.argv)
#!/usr/bin/parallel --shebang-wrap /bin/bash echo Arguments "$@"
#!/usr/bin/parallel --shebang-wrap /bin/csh echo Arguments "$argv"
#!/usr/bin/parallel --shebang-wrap /usr/bin/tclsh puts "Arguments $argv"
#!/usr/bin/parallel --shebang-wrap /usr/bin/Rscript --vanilla --slave args <- commandArgs(trailingOnly = TRUE) print(paste("Arguments ",args))
#!/usr/bin/parallel --shebang-wrap ARG={} /usr/bin/gnuplot print "Arguments ", system(echo $ARG)
#!/usr/bin/parallel --shebang-wrap /usr/bin/ruby print "Arguments " puts ARGV
#!/usr/bin/parallel --shebang-wrap /usr/bin/octave printf ("Arguments"); arg_list = argv (); for i = 1:nargin printf (" %s", arg_list{i}); endfor printf ("\n");
#!/usr/bin/parallel --shebang-wrap /usr/bin/clisp (format t "~&~S~&" Arguments) (format t "~&~S~&" *args*)
#!/usr/bin/parallel --shebang-wrap /usr/bin/php <?php echo "Arguments"; foreach(array_slice($argv,1) as $v) { echo " $v"; } echo "\n"; ?>
#!/usr/bin/parallel --shebang-wrap /usr/bin/node var myArgs = process.argv.slice(2); console.log(Arguments , myArgs);
#!/usr/bin/parallel --shebang-wrap /usr/bin/lua io.write "Arguments" for a = 1, #arg do io.write(" ") io.write(arg[a]) end print("")
#!/usr/bin/parallel --shebang-wrap ARGV={} /usr/bin/csharp var argv = Environment.GetEnvironmentVariable("ARGV"); print("Arguments "+argv);
GNU parallel can work as a counting semaphore. This is slower and less efficient than its normal mode.
A counting semaphore is like a row of toilets. People needing a toilet can use any toilet, but if there are more people than toilets, they will have to wait for one of the toilets to become available.
An alias for parallel --semaphore is sem.
sem will follow a person to the toilets, wait until a toilet is available, leave the person in the toilet and exit.
sem --fg will follow a person to the toilets, wait until a toilet is available, stay with the person in the toilet and exit when the person exits.
sem --wait will wait for all persons to leave the toilets.
sem does not have a queue discipline, so the next person is chosen randomly.
-j sets the number of toilets.
The default is to have only one toilet (this is called a mutex). The program is started in the background and sem exits immediately. Use --wait to wait for all sems to finish:
sem sleep 1; echo The first finished && echo The first is now running in the background && sem sleep 1; echo The second finished && echo The second is now running in the background sem --wait
Output:
The first is now running in the background The first finished The second is now running in the background The second finished
The command can be run in the foreground with --fg, which will only exit when the command completes:
sem --fg sleep 1; echo The first finished && echo The first finished running in the foreground && sem --fg sleep 1; echo The second finished && echo The second finished running in the foreground sem --wait
The difference between this and just running the command, is that a mutex is set, so if other sems were running in the background only one would run at a time.
To control which semaphore is used, use --semaphorename/--id. Run this in one terminal:
sem --id my_id -u echo First started; sleep 10; echo First done
and simultaneously this in another terminal:
sem --id my_id -u echo Second started; sleep 10; echo Second done
Note how the second will only be started when the first has finished.
A mutex is like having a single toilet: When it is in use everyone else will have to wait. A counting semaphore is like having multiple toilets: Several people can use the toilets, but when they all are in use, everyone else will have to wait.
sem can emulate a counting semaphore. Use --jobs to set the number of toilets like this:
sem --jobs 3 --id my_id -u echo Start 1; sleep 5; echo 1 done && sem --jobs 3 --id my_id -u echo Start 2; sleep 6; echo 2 done && sem --jobs 3 --id my_id -u echo Start 3; sleep 7; echo 3 done && sem --jobs 3 --id my_id -u echo Start 4; sleep 8; echo 4 done && sem --wait --id my_id
Output:
Start 1 Start 2 Start 3 1 done Start 4 2 done 3 done 4 done
With --semaphoretimeout you can force running the command anyway after a period (positive number) or give up (negative number):
sem --id foo -u echo Slow started; sleep 5; echo Slow ended && sem --id foo --semaphoretimeout 1 echo Forced running after 1 sec && sem --id foo --semaphoretimeout -2 echo Give up after 2 secs sem --id foo --wait
Output:
Slow started parallel: Warning: Semaphore timed out. Stealing the semaphore. Forced running after 1 sec parallel: Warning: Semaphore timed out. Exiting. Slow ended
Note how the 'Give up' was not run.
GNU parallel has some options to give short information about the configuration.
--help will print a summary of the most important options:
parallel --help
Output:
Usage: parallel [options] [command [arguments]] < list_of_arguments parallel [options] [command [arguments]] (::: arguments|:::: argfile(s))... cat ... | parallel --pipe [options] [command [arguments]] -j n Run n jobs in parallel -k Keep same order -X Multiple arguments with context replace --colsep regexp Split input on regexp for positional replacements {} {.} {/} {/.} {#} {%} {= perl code =} Replacement strings {3} {3.} {3/} {3/.} {=3 perl code =} Positional replacement strings With --plus: {} = {+/}/{/} = {.}.{+.} = {+/}/{/.}.{+.} = {..}.{+..} = {+/}/{/..}.{+..} = {...}.{+...} = {+/}/{/...}.{+...} -S sshlogin Example: foo@server.example.com --slf .. Use ~/.parallel/sshloginfile as the list of sshlogins --trc {}.bar Shorthand for --transfer --return {}.bar --cleanup --onall Run the given command with argument on all sshlogins --nonall Run the given command with no arguments on all sshlogins --pipe Split stdin (standard input) to multiple jobs. --recend str Record end separator for --pipe. --recstart str Record start separator for --pipe. See man parallel for details Academic tradition requires you to cite works you base your article on. When using programs that use GNU Parallel to process data for publication please cite: O. Tange (2011): GNU Parallel - The Command-Line Power Tool, ;login: The USENIX Magazine, February 2011:42-47.
When asking for help, always report the full output of this:
parallel --version
Output:
GNU parallel 20210122 Copyright (C) 2007-2021 Ole Tange, http://ole.tange.dk and Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later https://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. GNU parallel comes with no warranty. Web site: https://www.gnu.org/software/parallel When using programs that use GNU Parallel to process data for publication please cite as described in the manpage.
In scripts --minversion can be used to ensure the user has at least this version:
parallel --minversion 20130722 && \ echo Your version is at least 20130722.
Output:
20160322 Your version is at least 20130722.
With --max-line-length-allowed GNU parallel will report the maximal size of the command line:
parallel --max-line-length-allowed
Output (may vary on different systems):
131071
--number-of-cpus and --number-of-cores run system specific code to determine the number of CPUs and CPU cores on the system. On unsupported platforms they will return 1:
parallel --number-of-cpus parallel --number-of-cores
Output (may vary on different systems):
4 64
The defaults for GNU parallel can be changed systemwide by putting the command line options in /etc/parallel/config. They can be changed for a user by putting them in ~/.parallel/config.
Profiles work the same way, but have to be referred to with --profile:
echo --nice 17 > ~/.parallel/nicetimeout echo --timeout 300% >> ~/.parallel/nicetimeout parallel --profile nicetimeout echo ::: A B C
Output:
A B C
Profiles can be combined:
echo -vv --dry-run > ~/.parallel/dryverbose parallel --profile dryverbose --profile nicetimeout echo ::: A B C
Output:
echo A echo B echo C
I hope you have learned something from this tutorial.
If you like GNU parallel:
(Re-)walk through the tutorial if you have not done so in the past year https://www.gnu.org/software/parallel/parallel_tutorial.html
Give a demo at your local user group/your team/your colleagues
Post the intro videos and the tutorial on Reddit, Mastodon, Diaspora*, forums, blogs, Identi.ca, Google+, Twitter, Facebook, Linkedin, and mailing lists
Request or write a review for your favourite blog or magazine (especially if you do something cool with GNU parallel)
Invite me for your next conference
If you use GNU parallel for research:
Please cite GNU parallel in you publications
If GNU parallel saves you money:
(Have your company) donate to FSF or become a member https://my.fsf.org/donate/
(C) 2013-2021 Ole Tange, GFDLv1.3+ (See LICENSES/GFDL-1.3-or-later.txt)